December 21, 2013
Top 10 actions to create an excellent ceramic tile installation
If installing porcelain floor tiles is completely new at all to you, Top 10 Tips in order to complete an effective ceramic tile installation is a set of practical and yet required techniques that you’re going to help you stay away from causing expensive issues on your ceramic tile installation.
What tools you will need to install ceramic tile installation
Just before you start, you need a hammer, chalk line, level, saber saw with carbide blade (practical although not necessary), rubber gloves, tile mastic, tile grout sealer, tiles, edging cap and two outside corner edge caps for ceramic tile, and a paint stirring stick or old toothbrush to use for forcing grout deeply into the tile joints. You can also rent or buy a grooved trowel, tile nippers, tile cutter, and rubber squeegee.
1. Prepare which kind of ceramic tile
This action is usually disregarded or even ignored (is it possible to accept it?). Making plans for your ceramic tile installation from A to Z is most likely the most significant actions for the smooth, easy going and question free bathroom tile installation.
Some things to take in account are;
A. Suitableness of the tile
B. Design /colour of the tile
C. What Size of the tile
D. What Size of the area to be tiled. (This is crucial information which will be crucial to realize a lot tile, grout, etc, you need to shop for)
E. Adhesive material, mortar or perhaps grout to meet your requirements
Never assume all ceramic tile installations are the same, different tiling installations may require different mortar or grout. TRY NOT TO feel afraid concerning questioning the suppliers for guidance or help in determining just how much you’ll need. They will happily provide help, because they are expected to make a sale.
2. Go shopping around if you want to save
This is not as tough as the initial step, nevertheless whenever funds are limited it could be difficult to get the appropriate floor tile when it comes to ceramic tile installation you want. You are planning to need to make any adjustments and so don’t get carried away by the beauty of some of the ceramic tiles. Price ranges can differ a lot between different tiles, so some end up rather high-priced just for a few square metres.
Continually look around, it offers never been easier. Just sit in front of the computer and use the Internet. Choose local directories to discover the suppliers near to you personally as well as pay them a visit. Just before getting your final decision always check the chosen tile under different lights as the results can be surprisingly different.
3. Organize the surface for a long lasting job before laying the ceramic tiles
The surface to be tiled (floor, wall or any other) will often need to be prepared, this can come with work like filling up, levelling, smoothing, priming and in some cases water proofing.
The right planning will be directly affect the lifespan of the ceramic tile installation. Except if you should be tiling again quickly, you need to have this right from the start. This is definitely the most important point to make sure a long lasting tiling job. Do not rush it.
4. Installing the ceramic tiles carefully
The strategy concerning installing ceramic tiles is certainly not very complicated. It takes merely some process just before anybody can effortlessly learn it. Clearing the area to be tiled before starting will help you to do the job safer and easier. Don’t forget to use your safety goggles whenever slicing or perhaps cracking floor tiles.
Installing ceramic tiles can possibly even be quite disorganized, if you do not desire dirt all around the home we recommend closing the area you want to tile whenever possible. A large piece of plastic material added to the door frame will do the job quite very well.
Try to avoid any adhesive to get on your skin and never forget to read the manufacturers instructions well before even opening the tin. If some ends up on you, just cleanse it with water as soon as possible. Even though tile adhesives aren’t usually abrasive, if you leave it for some time it may cause an allergic reaction. Use a spirit level to help you with the depth
5. The finishing touches
Once the tile adhesive or mortar has cured (dried) and the tiles are firm and even, you can start with the finishing touches.You’ll have to fill the spaces between tiles with grout making sure you don’t leave any gaps as these cause damp problems, in a shower for example.
The strategy is very simple, use a rubber faced trowel to spread the grout and a cotton cloth to clean the excess grout from the tiles afterwards. There are many different types of grouts; you’ll have to choose the right one depending on the surface and chosen tile.Now that you have your ceramic tiles laid down, you only need to take care of them, usually manufacturers provide information on taking care of their tiles and only minimal effort is required.
Most household cleaning products will do the job well, if some specific stain is stubborn, there are many commercial stain removers, just make sure you use the right product for the right tile.You are now much closer in order to finding just how pleasing it could be dealing with a tile installation yourself; just follow these 5 steps to get the best result.
How to Install a Ceramic Tile Floor
You must have preparation for installing the ceramic tile, it is best if you take a short while getting knowledge for the attributes for the particular floor tile as well as design you have picked. If you’re dealing with a particular design, it could be beneficial to dry-fit or perhaps dry-lay a part of the floor to determine whatever possible troubles with the layout. This dry-fit will afford you the chance to help make modifications just before the floor tile is placed in position. A dry-fit can even assist you to learn how to handle the joint spacing. Even though most tiles are created to have little variation in shape as well as squareness, a few floor tiles are created to come with a more natural look and to have more size variation.
1. If needed, mark or chalk recommendations for the floor layout. Marking a grid of guidelines can enable you to immediately see when the tile is moving outside of the prepared layout. It is significant to look for the ideal area to start the tile installation so that you could get out the space.
2. Blend some thinset mortar as explained earlier for setting the concrete backer board substrate.
3. Make use of a notched trowel to distribute the thinset mortar in a controllable spot (regarding as big an area as could be set in 10 minutes) and work it onto the backer board. Protect the whole surface with a steady bed of mortar and keep the grooves oriented in the same direction. The grooves in the mortar will allow any air under the tile to escape, minimizing air pockets and insufficient bonding.
4. You can set the tiles into place and carefully wiggle them to guarantee complete coverage of the thinset and to eliminate any air beneath the tile. Make use of spacers to help keep the tile straight and check the guidelines to keep the layout on track. Eliminate whatever excess thinset in the joints to allow enough room for the grout.
5. Undoubtedly, you will have to slice a few floor tiles. There are many ways to slice tile, the most popular techniques are with a diamond-tipped wet saw or a tile cutter. The wet saw is the same to a table saw and has a water-cooled, diamond-tipped blade that grinds through just about any type of tile and is best for creating difficult cuts and notches. Slide the tile slowly into the blade and let the saw do most of the work. Make sure maintain the water reservoir on the saw filled to keep the blade cool. Put on safety glasses, gloves, and ear protection when using a wet saw. Quick Tip: apply a china marker or crayon to mark the tile in which it should be cut. The china marker cannot easily wash off the tile surface when using the water-cooled wet saw. Quick Tip: When installing small cut pieces, it can be useful in order to distribute some thinset mortar on the back of the tile to ensure right adhesion.
How to Grout a Ceramic Tile Floor Effortlessly
Right after the ceramic floor tile has set for 24 hours, grout the floor. There are two kinds of grout are ready for ceramic tile, sanded and unsanded. Sanded grout includes sand and works best with wider joints, usually an 1/8” and larger. Unsanded grout does not contain sand and must be used in combination with tighter joints, an 1/8” or less, or between tiles that can be easily scratched, such as glass or granite. Both sanded and unsanded grouts are available in a variety of colors to complement any tile.
1. Most grout comes in powdered form, so the first step is to mix a batch of grout. Mixing the grout is very similar to mixing thinset mortar. Add the powdered mixture and water in an appropriately sized bucket, mix to a peanut-butter-like consistency, and let it sit, or slake, for about 10 minutes.
2. Although the grout mixture is slaking, double-check the gaps around the tiles to assure that they’re without free debris and deep enough for sufficient grout coverage.
3. You can use a rubber float to smear the grout mixture over the ceramic tile, working the grout into the joints. It is preferred to operate diagonally over the tiles to provide that the grout fills all the space between the tiles.You can use the edge of the grout float to gently scrape off any extra grout, pushing it into the unfilled joints. Joints abutting a another material should be left unfilled. If these joints are revealed, they must be caulked to accommodate the expansion and contraction of the different materials to reduce breaking.
4. Just after more than 10 or 15 minutes, avoid grouting and start cleaning most extra grout through the surface of the tiles. This is perhaps the most significant part of the process, simply because the grout sets up more quickly compared with the thinset – when it dries on the surface of the tile, it can be very hard to entirely get rid of. Working with a heavy-duty sponge and plenty of water, gently wipe clean the surface of the tile as well as wash the sponge. Ensure to shake out the sponge well each time it is rinsed: using too much water can weaken the grout. Replicate 2 or 3 times or until the surface of the tile is clean. It is best to work diagonally so as not to gouge the grout lines too deeply. (The goal is to clean the tile surface and smooth out the grout lines, not to get rid of the grout.) Be sure to keep shifting the water regularly, mainly because utilising clean water will reduce the number of times it takes to get the tile surface clean.
5. At last, right after the grout has set for a few hours, use a dry rag or buffing pad to polish the tile as well as washed any staying grout that is stuck on the surface.
You may also like:
This entry was posted in Tips and tagged in Tags: installing tile, ceramic tile installation, bathroom ceramic tile installation, ceramic tile imstall, laying ceramic tile, old ceramic tile replacement, tile installation.